|
|
Product Details:
Payment & Shipping Terms:
|
| Pump Series: | K3V112DT / K3V112DTP | Machine Application: | Kobelco SK200-8, SK210LC-8, SK250-8, SK260-8, Kato HD820-3 |
|---|---|---|---|
| Displacement: | 2 X 112 Cc/rev | Rated Pressure: | 34.3 MPa (343 Bar) |
| Peak Pressure: | 39.2 MPa (392 Bar) | Rated Speed: | 2100 Rpm |
| Cylinder Block Material: | Ductile Iron With Copper Alloy Shoe Face | Surface Hardness: | HRC 58-62 |
| Cleanliness Level: | NAS 8 / ISO 18/16/13 | Bearing Brand: | NSK / KOYO, C3 Clearance |
| Seal Material: | NBR And PTFE | Kit Contents: | Cylinder Block, Valve Plate, 9 Piston Shoes, Swash Plate, Ball Guide, Set Plate, Drive Shaft, 2 Bearings, Seal Package, Servo Springs |
| Bench Test: | 100 Percent Tested, Signed Inspection Report Available | Warranty: | 12 Months, Free Replacement Under USD 300 No Return |
| Shipping Options: | Door To Door Air Express, Air Freight, LCL, FCL | Documents Supplied: | Invoice, Packing List, Bill Of Lading, Certificate Of Origin, Form E, HS Code Sheet |
| Highlight: | K3V112DT Kit Cross Reference Numbers,Bench Tested Pump Kit Report,Legacy Excavator Pump Kit Warranty |
||
This K3V112DT hydraulic pump repair kit is built for one purpose: putting an older Kobelco SK200-8, SK210-8 or SK250-8 back to work without waiting weeks for a discontinued assembly. Every kit is assembled around a matched cylinder block and valve plate pair, dynamically balanced piston shoe set and a full bearing and seal package, so the pump is rebuilt to original running clearances in a single pass.
OEM dealers increasingly stop stocking kits for the -8 generation and earlier machines, while these units remain the backbone of rental fleets and quarry sites. We keep dedicated tooling and stock for legacy K3V112DT, K3V112DTP and K3V112DT-9C series pumps, including the older nine-hole set plate and ball guide configuration that many aftermarket suppliers have dropped.
| Component | Material / Specification | Qty |
|---|---|---|
| Cylinder block | Ductile iron, copper alloy shoe face, HRC 58-62 | 1 |
| Valve plate (port plate) | Bronze bimetal on steel backing, lapped to 0.003 mm flatness | 1 |
| Piston shoe set | 20CrMnTi piston, forged copper alloy slipper, matched set | 9 |
| Swash plate | Case hardened alloy steel, ground 0.005 mm | 1 |
| Ball guide and set plate | Bearing grade alloy steel | 1 set |
| Drive shaft | 42CrMo, spline ground to DIN 5480 | 1 |
| Bearings | NSK / KOYO cylindrical roller bearings, C3 clearance | 2 |
| Seal package | NBR and PTFE, oil and temperature resistant | 1 set |
| Servo piston and regulator springs | Spring steel, pre-set to rated pressure | 1 set |
Each matched rotating group is run on our 250 bar test bench before packing. A signed inspection report can be attached to the shipment at no cost, which lets your customer approve the part before installation.
| Test Item | Standard | Recorded Result |
|---|---|---|
| Rated pressure | 34.3 MPa (343 bar) | Held 10 min, no drift |
| Peak pressure | 39.2 MPa (392 bar) | Passed |
| Flow at rated speed | 2 x 112 cc/rev at 2100 rpm | Within 3 percent of nominal |
| Internal leakage | Below 2 L/min at rated pressure | 1.6 L/min maximum |
| Noise level | Below 72 dB at 1 m | 69 dB average |
| Reference Type | Number |
|---|---|
| Pump series | K3V112DT, K3V112DTP, K3V112DT-9C79 |
| OEM assembly reference | K3V112DT-1E05, K3V112DT-9N07 |
| Kobelco application | SK200-8, SK210LC-8, SK250-8, SK260-8 |
| Other application | Kato HD820-3, HD1430, Doosan DX225 core rebuild |
| Interchangeable wear parts | 708-2L-00300 cylinder block, 708-2L-04140 valve plate |
Documentation is prepared in house: commercial invoice, packing list, bill of lading, certificate of origin, and Form E for ASEAN destinations where the tariff preference applies. We also prepare the HS code classification sheet so your customs broker can clear the shipment without back and forth.
| Shipping Method | Transit | Best For |
|---|---|---|
| Door to door air express (DHL / FedEx) | 3 to 5 days | Single kit, machine down urgently |
| Air freight to your airport | 5 to 8 days | 5 to 30 sets, faster than LCL |
| LCL consolidation | 25 to 35 days | Mixed spare parts orders under 3 CBM |
| FCL 20ft or 40ft | 22 to 30 days | Full container of pump parts and undercarriage |
Is this kit suitable for a pump that has already been rebuilt once?
Yes. Bore and shaft condition are the only limits; send photos of the core and our engineer will confirm before you order.
Can you supply only the cylinder block and valve plate pair?
Yes, partial kits are available and the cross reference sheet lists the individual part numbers.
Do you ship to small repair workshops?
Yes, orders start from 1 set with air express door to door delivery.
Contact Person: Miss. Ever Zhang